Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Analisis Pengaruh Pengisian Massa Refrigeran R-22 Pada Kinerja Sistem Refrigerasi Mesin
Muhammad Ari Rizaldi (2019) | Tugas Akhir | -
Bagikan
Ringkasan
Pengisian refrigeran pada suatu sistem refrigerasi sangatlah menentukan kinerja dari sistem refrigerasi itu sendiri, pengisian massa refrigeran yang tepat ke dalam sistem akan menghasilkan kinerja yang baik. Pada umumnya pengisian refrigeran ke dalam sistem bergantung kepada suhu evaporasi yang ingin dicapai oleh sistem tersebut. Tujuan analisis kinerja pada sistem ini adalah untuk mencari pengisian massa refrigeran yang tepat sehingga dapat menghasilkan kinerja sistem yang baik. Pengujian dilakukan dengan mengamati sistem yang diisi refrigeran pada persentase 80% dari kapasitas sistem, kemudian diisi tambahan sebanyak 20% secara bertahap sampai massa refrigeran mencapai 120% dari kapasitas sitem, setiap persentase pengisian dilakukan pengamatan terhadap parameter yang telah ditentukan, parameter tersebut adalah COP, efisiensi, rasio kompresi dan suhu produk. Setelah dilakukan pengolahan data dari sistem yang divariasikan jumlah pengisian massa refrigerannya, didapatkan hasil untuk persentase pengisian massa refrigeran yang tepat, kinerja sistem yang baik berada pada variasi massa refrigeran normal yaitu 100 % dari kapasitas sistem, COP yang didapat adalah 4,17, untuk efisiensinya adalah 80%, rasio kompresi sebesar 4,67 dan suhu produk yang tercapai adalah -5⁰C. Kata Kunci: Efisiensi, Ice Tube Maker, Variasi Massa Refrigeran.
Ringkasan Alternatif
Refrigerant charging in a refrigeration system is very determine the performance of the refrigeration system itself, charging the appropriate mass of refrigerant into the system will produce good performance. In general, charging refrigerants into the system depends on the evaporation temperature that the system wants to achieve. The purpose of performance analysis on this system is to find the right mass refrigerant charging so that it can produce good system performance. The test is carried out by observing the refrigerant charged system at 80% percentage of the system capacity, then added as much as 20% gradually until the refrigerant mass reaches 120% of the system capacity, each percentage of filling is observed against the predetermined parameter, the parameter is COP, efficiency, compression ratio and product temperature. After processing the data from the system varied the amount of refrigerant mass filling, the results obtained for the percentage of refrigerant mass filling the right, good system performance is in the normal mass refrigeration mass is 100% of the capacity of the system, the COP obtained is 4.17, for efficiency is 80%, the compression ratio is 4.67 and the product temperature reached is -5⁰C. Kata Kunci: Efficiency, Ice Tube Maker, Refrigerant Mass.