Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Desain dan Implementasi Sistem Pendeteksi dan Pengamanan Kebocoran LPG serta Kebakaran dengan Notifikasi melalui Smartphone Android
Budhi Santoso (2017) | Skripsi | Teknik Elektro
Bagikan
Ringkasan
Pada tugas akhir ini telah didesain dan diimplementasikan suatu system pendeteksi dan keamanan kebocoran LPG serta kebakaran suatu ruangan. Sistem ini terdiri dari bagian hardware dan software. Bagian hardware terdiri dari mikrokontroler arduino rev3 yang terhubung dengan sensor gas MQ-6, sensor api photodiode, relay yang terhubung dengan solenoid valve, servo s3003 yang memiliki torsi 3,2 kg pada 4.8V, dan modem GSM Wavecom Fastrack M1306B yang berfungsi untuk melakukan panggilan dan mengirimkan SMS. Sistem software merupakan suatu aplikasi android yang dibuat menggunakan bahasa JAVA, yang berfungsi untuk merubah panggilan dan SMS yang dikirimkan oleh sistem hardware menjadi suatu alarm. Jika terjadi kebocoran LPG, sensor gas akan mendeteksi kebocoran tersebut dan mikrokontroler akan mengaktifkan servo untuk melepaskan regulator dari tabung gas LPG, serta mikrokontroler akan memberikan instruksi untuk melakukan panggilan kepada modem GSM, yang nantinya panggilan tersebut akan dirubah menjadi suatu alarm kebocoran LPG oleh aplikasi android. Sedangkan jika terjadi kebakaran, kebakaran tersebut akan terdeteksi oleh sensor api dan mikrokontroler akan mengaktifkan relay untuk menjalankan hydrant. Selain itu, mikrokontroler akan mengirimkan instruksi SMS kepada modem GSM, yang nantinya SMS tersebut akan dirubah menjadi alarm kebakaran oleh aplikasi android. Sistem hardware dan software tidak dapat berkomunikasi jika tidak terjangkau oleh jaringan GSM. Kata kunci: Sistem pendeteksi, pengamanan, mikrokontroler, MQ-6, photodiode, servo, solenoid valve, modem GSM, JAVA, Android.
Ringkasan Alternatif
In this final project has been designed and implemented a security system detection of LPG leak and fire in indoor. The system consists of hardware and software parts. The hardware consists of an Arduino rev3 microcontroller which is connected with the MQ-6 gas sensor, photodiode flame sensor, relay which is connected with solenoid valve, servo s3003 which has a torque of 3.2 kg at 4.8V, and WavecomFastrack M1306B GSM modem that serves to make calls and sending SMS. System software is an android application that is built using JAVA, which have functions to change the calls and SMS sent by the hardware into an alarm. If LPG leak is happen, the gas sensor will detect LPG leak and the microcontroller will activate the servo to release the regulator from the LPG gas tube, as well as the microcontroller will give instructions to make calls to the GSM modem, that's call which will be converted into an LPG leak alarm by android application. Whereas if there is a fire, the fire will be detected by the flame sensor and the microcontroller will activate relay to run the hydrant. In addition, the microcontroller will send the SMS instruction to the GSM modem, the SMS will be converted into a fire alarm by android application. Hardware and software systems can not communicate if it is not covered by GSM networks. Keywords: detection systems, security, microcontrollers, MQ-6, photodiode, servo, solenoid valve, GSM modem, JAVA, Android.