Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Kaji Eksperimental Pengaruh Penggunaan Metode Intercooler pada Mini Brine Cooling Berkapasitas 0,5 PK
Muhammad Adzkia Nur Fadhillah Suryana (2019) | Skripsi | -
Bagikan
Ringkasan
Intercooler merupakan komponen pendingin sebagai media untuk cairan refrigeran didinginkan oleh refrigeran sejenis lainnya. Intercooler dipasang dengan jenis tube in tube pada liquid line. Spesifikasi Intercooler yang digunakan adalah jenis tube in tube dengan panjang 20 cm, diameter pipa dalam 0,25 inch dan diameter pipa luar 0,75 inch. Tugas akhir ini terdapat 3 variasi aliran refrigeran primer pada bukaan hand valve menuju intercooler yaitu tertutup penuh, terbuka setengah dan terbuka penuh. Hal tersebut dilakukan untuk melihat pengaruh penggunaan intercooler pada mini brine cooling. Hasil dari penelitian yang dilakukan yaitu nilai rata-rata COPaktual dan COPCarnot pada variasi hand valve tertutup penuh, terbuka setengah dan terbuka penuh pada aliran masuk ke intercooler masing-masing adalah 2,46; 5,54, 2,23; 6,34 dan 1,82; 6,49. Kemudian rata-rata konsumsi daya listrik dan energi listrik pada variasi hand valve tertutup penuh, terbuka setengah dan terbuka penuh pada aliran masuk ke intercooler masing-masing yaitu 446,8W; 1,406 kWh, 456,7W; 2,383 kWh dan 457,5W; 2,61 kWh. Sedangkan pada persentase on cycle dan off cycle pada variasi bukaan hand valve tertutup penuh, terbuka setengah dan terbuka penuh pada aliran masuk ke intercooler masing-masing yaitu persentase on cycle bernilai 38,8%, 70,5%, dan 75% kemudian persentase off cycle bernilai 61,2%, 29,5%, dan 25%. Kata Kunci: Intercooler, Tube in tube, Mini Brine Cooling, COP, Efisiensi.
Ringkasan Alternatif
Intercoolers are cooling components as a medium for refrigerant liquids cooled by other similar refrigerants. Intercooler is installed with a type of tube in tube on liquid line. Intercooler specifications used are the type of tube in tube with a length of 20 cm, diameter of inner pipe is 0.25 inch and diameter of the outer pipe is 0.75 inch. This final project has 3 variations of primary refrigerant flow at the opening of the hand valve to the intercooler (intermediate line), which is fully closed, half open and fully open. This was done to see the effect of using intercoolers on mini brine cooling. The results of the research conducted is the average of COPactual and COPCarnot in a variety of fully closed, half open and fully open hand valves in the inflow to the intercooler are 2.46; 5.54, 2.23; 6.34 and 1.82; 6.49. Then the average of electricity power and electricity energy consumption in a variety of hand valves is fully closed, half open and fully open on the incoming flow to each intercooler, which is 446.8W; 1.406 kWh, 456.7W; 2.383 kWh and 457.5W; 2.61 kWh. While the percentage of on cycle and off cycle variations in the hand valve openings are fully closed, half open and fully open on the inflow to the intercooler respectively, namely on cycle percentage is worth 38.8%, 70.5%, and 75% then the off cycle percentage is worth 61.2%, 29.5% and 25%. Keywords: Intercooler, Tube in tube, Mini Brine Cooling, COP, Efficiency.