Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Kajian Komposit Hybrida Pada Sepeda Road Bike Dan Penyiapan Alat Bantu Manufakturnya
Panji Abdilah Khoerul Azmi (2018) | Tugas Akhir | -
Bagikan
Ringkasan
Tugas akhir ini membahas mengenai Kajian material komposit hibrida pada sepeda Road Bike dan penyiapan alat bantu manufakturnya. Penyelesaian topik tersebut, melanjutkan kegiatan perancangan sepeda yang telah dilakukan pada tahun-tahun sebelumnya. Namun karena permasalahan hasil manufakturnya terjadi banyak crack dan tidak presisinya struktur rangka sepeda, maka pada pelaksanaannya TA ini ditujukan untuk melakukan rancang bangun sepeda road bike dengan material komposit hibrida yang lebih presisi dengan alat bantu produksi sepeda. Pada pelaksanaannya, maka dilakukan beberapa hal, yaitu, 1) pemodelan interaksi sepeda dengan jalan, 2) uji tarik material hibrida, 3) uji fatigue material hibrida, 4) uji impak material hibrida, 4) perancangan geometri sepeda, 5) penentuan tegangan struktur rangka sepeda, dan 6) pembuatan alat bantu manufaktur sepeda. Jadi dalam hal ini proses yang dilakukan adalah kaji teoritik, kaji komputasional, dan kaji eksperimental. Dalam kaji komputasional dilakukan dengan menggunakan perangkat lunak Solid Works, Catia dan Matlab. Dari kaji komputasional, ternyata beban dinamik yang terjadi pada rangka sepeda adalah 300 Newton. Berdasarkan uji tarik, material komposit hibrida menghasilkan nilai 47.32 MPa. Dari uji fatigue, pada beban 1,212 Nm menghasilkan limit fatigue 1.535.563 siklus. Pada Uji Impak Keuletan tiga jenis material komposit hibrida masih kalah di bandingkan keuletan besi dan kuningan. Dari pelaksanaan TA ini, diketahui bahwa material hibrida dapat digunakan pada sepeda road bike. Alat bantu yang tepat untuk produksi sepeda ini setelah dilakukan pengujian pada prototipe, bingkai alat bantu tersebut memiliki kepresisian yang baik berdasarkan hasil water level. Prototipe alat bantu manufaktur sepeda ini dapat digunakan untuk perakitan sepeda. Kata kunci: Komposit Hibrida, Sepeda Road Bike, Partikel Material, Alat Bantu Produksi Sepeda.
Ringkasan Alternatif
This final project discusses the study of hybrid composite materials on road bike bikes and the preparation of manufacturing tools. The completion of the topic, continued the design of bicycles that have been done in previous years. However, due to the problem of manufacturing results, there are many cracks and no precision of bicycle frame structure, so in the implementation of this Final Project is aimed to design a road bike with hybrid composite material that is more precise with the tools of bicycle production. In the implementation, there are several things, namely: 1) modeling of bicycle interaction with road, 2) hybrid material tensile test, 3) hybrid material fatigue test, 4) impact test of hybrid material, 4) design of bicycle geometry, 5) Bicycle frames, and 6) designing of bicycle manufacturing tools. So in this case the process undertaken is a theoretical study, computational review, and experimental study. In the computational review is done by using software Solid Works, Catia and Matlab. From the computational study, it turns out the dynamic load that occurs on the bike frame is 300 Newton. Based on tensile test, hybrid composite material yields 47.32 MPa. From the fatigue test, at 1.212 Nm load the limit fatigue 1,535,563 cycles. In Impact Test, Ductile three types of hybrid composite materials are still lost in comparison to the ductility of iron and brass. From the implementation of this Final Project, it is known that hybrid material can be used on a road bike. The right tool for the production of this bike after testing on the prototype, the frame tool has a good precision based on water level results. The prototype of this bicycle manufacturing tool can be used for bicycle. Keywords: Hybrid Composite, Bike Road Bike, Particle Material, Bicycle Production Tool.