Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Optimasi Proses Nitrasi Naftalen (Sintesis Senyawa α-Nitronaftalen)
Latif Fauzi (2017) | Tugas Akhir | -
Bagikan
Ringkasan
Nitrasi adalah proses memasukkan satu atau lebih gugus nitro/nitril ion (NO2+) dengan mensubsitusi atom hidrogen atau atom/gugus lainnya. Proses nitrasi naftalen merupakan salah satu penerapan proses nitrasi hidrokarbon senyawa aromatik yang dapat diaplikasikan pada skala laboratorium. Tujuan dari penelitian ini untuk menentukan komposisi campuran asam HNO3 dan H2SO4 dan nilai rasio R (massa HNO3 terhadap massa naftalen) optimum pada nitrasi naftalen dengan membandingkan persentase yield dan titik leleh α-nitronaftalen terhadap literatur. Variabel yang divariasikan yaitu komposisi campuran asam HNO3 65%; H2SO498%; H2O; dan nilai R. Proses nitrasi naftalen dilakukan pada temperatur reaksi 60-65ðC, waktu reaksi 1 jam, dan pengadukan 125-150 rpm. Hasil penelitian menunjukkan bahwa kondisi optimum diperoleh pada komposisi campuran asam dalam persen massa yaitu 34,15% H2O, 50% H2SO4, 15,85% HNO3, serta nilai R yaitu 1,0 dengan persentase yield optimum sebesar 94.7% dan titik leleh 59,3ðC. Kata kunci: nitrasi, naftalen, α-nitronaftalen, campuran asam, nilai R.
Ringkasan Alternatif
Nitration is the process of inserting one or more nitro groups / nitrile ion (NO2+) by substituting hydrogen atom or atom / other groups. Naphthalene nitration process is one of the implementation process nitration of hydrocarbon aromatic compounds that can be applied on a laboratory scale. The purpose of this study is to determine composition of mixed-acid HNO3 and H2SO4,and R values(ratio of HNO3Ãâs mass to naphthalene's mass)optimum in nitration naphtalene process by comparing yield percentage and melting point to the α-nitronaphtalene product literature. Variable which varied are composition of HNO3 65%; H2SO498%; H2O; and R values. Naphthalene nitration process is done at reaction's temperature is 60-65ðC, reaction time is 1 hour, and stirring at 125-150 rpm. The result show that the optimum condition obtained on composition mixed acid within percent mass are 34,15% H2O, 50% H2SO4, 15,85% HNO3 and the R values is 1,0 with yield percentage optimum product amounted to 94.7% and the melting point is 59,3ðC Keywords: nitration, naphthalene, α-nitronaftalen, mixed acid, R values.