Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
OTOMATISASI PENGISIAN MINUMAN PADA KEMASAN BERBASIS MIKROKONTROLER ATMEGA 8535 BAGIAN : MODUL PENGISI CAIRAN DAN PENDORONG KEMASAN
Asep Yohan Oktian (2013) | Tugas Akhir | Teknik Elektro
Bagikan
Ringkasan
Dewasa ini sistem otomatisasi sudah merambah di segala bidang, seperti pada pabrik-pabrik produsen minuman terdapat serangkaian proses pengisian kemasan yang terjadi ketika proses produksi. Untuk mempermudah proses produksi,maka dibutuhkan suatu sistem pengendali otomatis yang dapat melakukan pengisian kemasan secara otomatis. Oleh karena itu, dirancang Pengisi Cairan pada Kemasan Otomatis. Pengisi kemasan ini menggunakan Relay sebagai driver Solenoid valve. Semua sistem dalam pengisi kemasan ini dikendalikan oleh mikrokontroler yaitu mikrokontroler ATmega 8535. Pada pengisi kemasan ini terdapat sebuah sensor level air yang menggunakan potensiometer dan pelampung. Sensor level air ini akan mendeteksi volume cairan yang tersisa pada tangki. Selain itu juga dipasang sensor pendeteksi kemasan yang dapat mendeteksi keberadaan kemasan. Sensor yang dipakai yaitu photodioda dan LED infra merah yang dipasang tepat di bawah kran tempat minuman keluar. Saat photodioda mendetaksi ada kemasan, maka secara otomatis minuman keluar dan mengisi kemasan tersebut. Keseluruhan proses dan keadaan volume tangki pada sistem akan ditampilkan pada LCD. Selain itu, dibuat juga alat pendorong kemasan yang berfungsi untuk mendorong kemasan keluar dari konveyor atau sistem. Alat pendorong kemasan ini juga menggunakan Relay sebagai driver untuk menggerakan motor DC sebagai penggerak pendorongnyanya. Modul pengisi cairan dapat mengisi kemasan dengan volume +180 ml dengan waktu pengisian selama 8 detik dan alat pendorong kemasan mampu mendorong kemasan dengan jarak dorong 5 cm selama 2 detik. Modul pengisi dan pendorong kemasan ini merupakan bagian dari "Otomatisasi Pengisian Minuman Pada Kemasan Berbasis Mikrokontroler Atmega 8535". Kata kunci: ATMega8535, LCD, solenoid valve, Relay, photodioda, LED Infra merah, Motor.
Ringkasan Alternatif
Nowadays, automation system has been improved in all fields, such as in plant beverages manufacturers, they have a set of filling processes that occurs when the production process. To simplify the production of process, required an automatic control system that can be automatically fill the cup. Therefore designed automatic liquid filler in the cup .
This cup filler used Relay as driver Solenoid valve. All system is controlled by the microcontroller ATmega 8535. On this system there is a water level sensor using a potentiometer and float. Water level sensors will detect the volume of liquid remaining in the tank . It also mounted detection sensor that can detect the presence of the cup. The sensor used is photodiode and infrared LED mounted just below the valve where the liquids out . When photodioda detect any cup, it will automatically go out and fill beverage to the cup. The entire process and the state of the tank volume on the system will be displayed on the LCD.
In addition is made also a cup booster that serves to drive up the package packing out of the system. The cup booster is also use the relay as the driver for driving the DC motor .
The cup filler can fill the cup with volume + 180ml with charging time for 9 seconds and the cup booster capable of driving up the cup with a distance of 5 cm for 2 second. The cup filler and the cup booster is part of the "Automation of Beverage Filler Into The Cup Based On Microcontroller Atmega 8535"
Keyword: ATMega8535, LCD, solenoid valve, Relay, photodioda, LED, Motor.