Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pembuatan Cyclone Separator untuk Pembersihan Producer Gas Gasifikasi Batubara
Wina Annisa Antika (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Producer gas hasil gasifikasi batubara memiliki kandungan partikulat yang tinggi dengan ukuran partikel rata-rata 10 - 15 mikron. Pemanfaatan producer gas hasil gasifikasi batubara sebagai bahan bakar membutuhkan suatu perangkat yang dapat mengurangi kadar partikulat yang terdapat di dalam producer gas. Cyclone separator efektif untuk memisahkan partikel dengan ukuran lebih dari 10 mikron (Marwasofa,2017). Pembuatan cyclone separator dilakukan untuk mengurangi kadar partikulat dalam producer gas dengan cara pemisahan partikel dan aliran gas dengan gaya sentrifugal yang terjadi didalam cyclone. Cyclone separator dirancang pada desain reaktor gasifikasi kapasitas 0,0156 m3 /s dan didapat diameter body Cyclone 102 mm . Bagian- bagian dari cyclone dibuat berdasarkan standar rasio geometri high efficiency cyclone Stairmand. Cyclone separator dibuat dengan menggunakan plat BJLS 80. Dari hasil pengujian cyclone separator dengan reaktor gasifikasi batubara didapat unjuk kerja pemisahan partikel pada cyclone separator adalah 80 % dengan masa partikulat yang terpisahkan sebanyak 3 gram. Kata kunci: Gasifikasi batubara, producer gas, partikulat, cyclone separator.
Ringkasan Alternatif
Coal gas producers have high particulate content with an average particle size of 10-15 microns. Utilization of producer gas produced from coal gasification as fuel requires a device that can reduce levels of particulates contained in producer gas. Cyclone separator is effective for separating particles with a size of more than 10 microns (Marwasofa, 2017). The making of cyclone separator is done to reduce particulate content in producer gas by separating particles and gas flow by centrifugal force that occurs in the cyclone. Cyclone separator was designed in the gasification reactor design capacity of 0.0156 m3 / s and obtained a 102 mm Cyclone body diameter. Parts of the cyclone are made based on the standard Stairmand cyclone high efficiency geometry ratio. Cyclone separator was made using BJLS 80 plate. From the results of the cyclone separator test with coal gasification reactor, the performance of particles separation in cyclone separator was 80 % with a separated particulate mass of 3 grams. Keywords: coal gasification, producer gas, particulate matter, cyclone separator.