Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pembuatan Simulator Level Contro Dengan Pilihan Menggunakan PLC Atau Relay
Ghozy Amrulloh (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Pompa adalah suatu mesin fluida yang mengubah dari energi mekanik ke energi fluida. Pompa berfungsi sebagai alat pemindah zat cair dari satu tempat ke tempat lainnya yang mempunyai elevasi berbeda. Penggunaan alat praktikum pompa di Labratorium Pneumatik Hidrolik dan Mekatronika masih belum terdapat model alat berupa Simulator level control dengan pilihan menggunakan PLC atau relay. Simulator level control dengan pilihan menggunakan PLC atau relay sebagai penunjang alat praktikum mata kuliah Mekatronika menjadi tujuan utama dalam pembuatan alat ini. Proses pembuatan simulator level control ini meliputi perancangan, pengadaan dan perakitan komponen, serta pembuatan rangka yang menggunakan proses fabrikasi. Simulator level control yang telah dibuat dapat menggerakkan dua buah pompa yang terdapat dua buah tombol sebagai start dan stop sistem sirkulasi air dari reservoir yang berada di bawah ke reservoir yang berada di atas dimana terdapat tiga buah level sensor (S0, S1, S2) pada reservoir bagian atas tersebut yang dapat dioperasikan menggunakan PLC atau relay. Hasil uji coba dari pembuatan simulator level control ini dapat digunakan sebagai penunjang alat praktikum mata kuliah Mekatronika.
Ringkasan Alternatif
A pump is defined as a fluid machine converting mechanical energy into fluid energy. It is used for moving liquid from one place to another place which has a different elevation. The use of pump practicum tools in Hydraulic Pneumatic Laboratory and Mechatronics still does not have a tool model in the form of a level control simulators with options using a PLC or relay. Level control simulators with options using PLC or relay as supporting practical tool in Mechatronics subject is the main objective to conduct the machine. The process of making this level control simulators consists of designing, procuring, assembling the components and making the frame using fabrication process. Level control simulators that has been made is able to start the two pumps that have two buttons as a start and stop water circulation system from the bottom reservoir to the top reservoir which has three sensor levels (S0, S1, S2) that can be operated by using PLC or relay. The trial results from manufacture of this level control simulators can be used as a supporting practical tool for Mechatronics subject.