Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pembuatan Sistem Kontrol Kecepatan Fan Pendingin Radiator Menggunakan Arduino
Egi Vani Nugraha (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Setiap proses produksi membutuhkan suatu sistem pendinginan yang fungsinya untuk membantu kinerja sistem, pengkondisi temperatur yang menjadi standar dan lain sebagainya. Radiator dengan media udara sebagai pendingin menjadi salah satu contohya, pendinginan dilakukan dengan udara sebagai media pendinginnya, dimana udara di kondisikan oleh fan (kipas). Fan ini akan bekerja sehingga putaran yang dihasilkan tidak konstan namun mengikuti input tersebut untuk natinya putaran fan ini akan menetukan temperatur 25oC yang diasumsikan sebagai temperatur ruang. Oleh karenan itu dibutuhkan suatu Kontrol untuk mengatur besar kecilnya kecepatan putar dari fan tersebut. Yakni dengan menggunakan sistem kontrol yang berbasis mikrokontroller dengan Arduino. Sistem ini bekerja dengan memasukan suatu program perintah dengan metode PID yang dilakukan pada sistem. Input temperatur yang di baca oleh sensor (thermocouple) ini akan diolah oleh program Arduino yang akan mengeluarkan output tegangan analog 0-5 V yang selanjutnya menjadi input motor drivernya yakni MOSFET sebagai penyulut gate untuk mengatur besar kecilnya tegangan yang masuk ke fan antara 0-9V. Hasil dari proses pendinginan ini telah berhasil menurunkan temperatur sistem ke nilai set point 25oC selama 87 sekon, yang sebelumnya belum bisa dicapai jika tanpa kontrol fan. Kata kunci: Radiator, fan, sensor temperatur, Arduino,PID, MOSFET.
Ringkasan Alternatif
Each production process requires a cooling system whose function is to assist system performance, temperature conditioners that become standard and so forth. Radiator with air as a cooling medium is one example, cooling is done with air as a cooling medium, where the air is conditioned by the fan (fan). This fan will work so that the rotation generated is not constant but following the input for the rice fan rotation will determine the temperature of 25oC which is assumed to be room temperature. Therefore, a control is needed to adjust the size of the rotational speed of the fan. Namely by using a microcontroller-based control system with Arduino. This system works by entering a program command with the PID method performed on the system. The temperature input read by the sensor (thermocouple) will be processed by the Arduino program which will output an analog voltage output of 0-5 V which then becomes the input of the motor driver MOSFET as the ignition gate to regulate the size of the voltage entering the fan between 0-9 V. The results of this cooling process have succeeded in lowering the system temperature to a set point value of 25oC for 87 seconds, which previously could not have been achieved without fan control. Keywords: Radiator, fan, temperature sensor, Arduino, PID, MOSFET.