Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pemodelan Potensi Hydraulic Fracture Pada Saat Pengisian Waduk Pertama Bendungan Rockfill (Komunitas Bidang Ilmu : Geoteknik)
Wilson Koven NIM. (2014) | Skripsi | Teknik Sipil
Bagikan
Ringkasan
Bendungan rockfill akan mengalami kondisi kritis pada awal pengisian waduk akibat terjadinya hydraulic fracture pada hulu inti bendungan. Hydraulic fracture (retak hidrolis) pada bendungan rockfill terjadi akibat tanah tidak mampu menahan tegangan tarik dari tekanan hidrolis. Tegangan tarik akan terjadi apabila tekanan air pori lebih besar dari tegangan efektif tanah. Tekanan air pori akan meningkat pada saat pengisian waduk dan akan mengurangi tegangan efektif tanah. Untuk menganalisis perubahan tekanan air pori dan tegangan efektif selama proses pengisian maka dilakukan pemodelan potensi hydraulic fracture. Pada studi ini, pemodelan potensi hydraulic fracture dilakukan dengan model tanah elastic-plastic untuk inti bendungan dan linear-elastic untuk filter dan rockfill dengan kondisi tanah unsaturated dimana koefisien rembesan merupakan fungsi Soil-Water Characteristic Curve (SWCC). Pemodelan dilakukan menggunakan software komputer SEEP/W untuk menganalisis rembesan dan SIGMA/W untuk menganalisis tegangan. Pada studi ini akan ditampilkan pola debit rembesan, kontur tekanan air pori, tegangan total dan tegangan efektif pada hulu inti bendungan.
Ringkasan Alternatif
Rockfill dam will suffer critical condition in the first impoundment due to hydraulic fracture on the upstream core of the dam. Hydraulic fracture on rockfill dam will occur when the soil unable to uphold the tensile stress from the hydraulic stress. Tensile stress will occur if the pore water pressure increase and overcome the effective stress of the soil. Pore water pressure will increase in the first impoundment and will reduce the effective stress of the soil. In order to analyze the change of the pore water pressure and the effective stress of the soil during the first impoundment, modeling the hydraulic fracture potential is required. In this study, the modeling of hydraulic fracture potential, soil will be modeled as elastic plastic for the dam core and linear-elastic for the filter and the rockfill in the condition of unsaturated soil where the coefficient of permeability is the function of Soil-Water Characteristic Curve (SWCC). Modeling will be conducted using SEEP/W to analyze the seepage and SIGMA/W to analyze the stresses. This study will show the pattern of water discharge, contour of pore water pressure. Total stress and effective stress on the upstream core of the dam