Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Penerapan Produksi Bersih melalui Proses Penurunan Parameter Efluen Instalasi Pengolahan Air Limbah Industri Kertas
Ari Haryanto (2017) | Tugas Akhir | -
Bagikan
Ringkasan
Kuantitas Air yang dibuang ke lingkungan oleh pengolahan limbah industri kertas sangatlah besar dan mempunyai nilai Daya Hantar Listrik yang sangat tinggi sehingga sulit untuk dimanfaatkan kembali menjadi ari proses melalui proses daur ulang. Oleh karena itu dilakukan penelitian mengenai penerapan produksi bersih melalui proses penurunan parameter efluen instalasi pengolahan air limbah industri kertas. Metode yang digunakan yaitu adsorpsi kimia dengan media zeolit aktif sebagai pretreatment dan proses elektrokoagulasi. Parameter yang dianalisis yaitu Daya Hantar Listrik (DHL), TSS, pH dan Kekeruhan. Media pretreatment yang digunakan yaitu kolom zeolit aktif dengan dimensi tinggi 50 cm dan diameter 10 cm. Sedangkan pada elektrokoagulasi, Rapat Arus yang digunakan yaitu 0.17 A/cm2, 0.21 A/cm2 , 0.36 A/cm2 , 0.73 A/cm2 , 0.9 A/cm2 dengan waktu proses 40 menit dan jarak elektroda 5 cm pada reaktor volume 1L. Hasil penelitian menunjukan adanya penurunan Daya Hantar Listrik (DHL), TSS dan Kekeruhan pada air tersebut. Efisiensi Nilai penurunan DHL terbesar pada adsorpsi dan elektrokoagulasi berturut-turut yaitu 3,8 % dan 22,6 %. Sedangkan untuk efisiensi penurunan nilai kekeruhan terbesar yaitu 95,65 % dengan proses elektrokoagulasi pada arus 0.73 A/cm2 dan waktu proses 40 menit. Untuk efisiensi penurunan nilai TSS terbesar yaitu mencapai 100 % dengan proses elektrokoagulasi pada arus 0.73 A/cm2 dan waktu 40 menit. Sedangkan untuk nilai pH pada kondisi dari kedua metode mempunyai nilai antara 7-9. Kata kunci: Produksi bersih, Air efluen, Adsorpsi, Elektrokoagulasi.
Ringkasan Alternatif
The Quantity of water discharged into the environment by the paper industry is in very great amount. The problem is the water having high conductivity and it can not be recycled back to be reused as industrial water. Therefore, research was conducted to study the application of cleaner production through the reduction of waste water treatment parameter effluent in paper industry. The applied method were adsorption using activated zeolite as a pretreatment and electrocoagulation process. The major pretreatment analyzed were Conductivity, Total Suspended Solid, pH and turbidity. Pretreatment media used in this research was activated zeolite in a coloum with the dimension of 50 cm and 10 cm in diameter. However, in electrocoagulation process, the current densities used were 0.17, 0.21, 0.36, 0.73 and 0,9 A/cm2 respectively. The time used during the process was 40 minutes with electrodes distance of 5 cm in the 1000 ml reactor. Result of research show degradation of conductivity, TSS and Turbidity. Efficiency of highest conducticiy degradation in pretreatment and electrocoagulation process are 3,8 % and 22,6 %. However efficiency of highest turbidity degradation is 95,65 % with electrocoagulation process of 0.73 A/cm2 and process time of 40 minutes. For efficiency of highest TSS degradation is 100 % with electrocoagulation process of 0.73 A/cm2 and process time of 40 minutes. For pH in both of those conditions has range value between 7-9. Key word: Cleaner Production, effluent water, adsorption, electrocoagulation.