Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pengaruh Suhu Pirolisis terhadap Yields Asap Cair Tempurung Kelapa
Arief Satrio (2017) | Tugas Akhir | -
Bagikan
Ringkasan
Krisis energi mendorong pencarian energi alternatif baru untuk memenuhi kebutuhan energi guna meningkatkan pertumbuhan ekonomi Indonesia. Pirolisis merupakan dekomposisi senyawa penyusun kayu menggunakan panas tanpa oksigen menghasilkan asap cair, arang dan gas yang akan dimanfaatkan sebagai sumber energi alternatif dan juga bahan kimia. Pada penelitian ini hanya fasa cair yang diteliti fasa gas dan padat di abaikan. Dalam fasa cair (asap cair) terdapat dua lapisan yaitu lapisan atas sebagai bio-oil dan lapisan bawah sebagai tar. Tujuan penelitian ini adalah menentukan pengaruh suhu pirolisis terhadap yields asap cair dari tempurung kelapa, mengukur sifat fisik bio-oil dan tar, pemurnian bio-oil dan tar dengan cara distilasi vakum dan mengetahui komposisi senyawa bio-oil dan tar sebelum dan sesudah distilasi vakum. Proses pirolisis dilakukan dengan menggunakan reaktor batch, proses dilakukan dengan memvariasikan suhu pemanasan 250oC hingga 500oC dengan rentang suhu 50oC. Hasil penelitian menunjukan bahwa kondisi optimum pirolisis pada suhu 400oC dengan nilai yields bio-oil sebesar 72.531 %. Dilakukan analisis terhadap asap cair secara fisik seperti densitas dengan nilai 1.0534 g/ml untuk bio-oil, 1.0933g/ml untuk tar, pH dengan nilai 2.06 untuk bio-oil, 2.225 untuk tar, viskositas dengan nilai 50.128 cSt untuk bio-oil, 86.38 cst untuk tar, nilai kalor dengan nilai 10940.58 kkal/Kg untuk bio-oil, 4864.06 kkal/Kg untuk tar dan dilakukan pemurnian dengan distilasi vakum. Dilakukan analisis asap cair sebelum dan sesudah pemurnian dengan GC-MS untuk mengetahui senyawa asam asetat dan fenol dalam bio-oil dengan perkiraan hasil sebelum distilasi berturut-turut sebesar 27.59%, 15.30% dan setelah pemurnian sebesar 44.775%, 7.821%. Sedangkan hasil fenol yang didapat dalam tar sebelum distilasi sebesar 23.252%, dan setelah distilasi 42.82%. Kata kunci: Suhu, Pirolisis, Tempurung Kelapa, Sifat fisik.
Ringkasan Alternatif
Energy crisis prompted the search for new alternative energy to meet the energy needs in order to increase economic growth of Indonesia. Pyrolysis is decomposition of wood compund using heat without oxygen to produce liquid smoke, charcoal and gas which are utilized as alternative energy source and chemicals. This study only liquid phase examination, whilst gas and solid phase were ignored. In the liquid phase (liquid smoke), there are two layers, the upper layers of the bio-oil and the bottom layer as tar. The purpose of this study was to determine the influence of pyrolysis temperature on liquid smoke coconut shell, measuring the physical properties of bio-oil and tar, purification of bio-oil and tar by means of vacuum distillation and to determine the composition of bio-oil compound and tar, before and after vacuum distillation. Pyrolysis process was done by using a batch reactor, the process is done by varying the heating temperature of 250oC to 500oC with temperature range of 50oC. The results showed that the optimum conditions for pyrolysis at temperatures of 400oC with bio-oil yield of 72, 531%. Analisis of physical properties of liquid smoke showed density of 1.0534 g / ml for bio-oil, 1.0933g/ml for tar, with a pH value of 2:06 for bio-oil, 2,225 for tar, with a viscosity of 50 128 cSt value for bio-oil, 86.38 cst for tar, calorific value of 10940.58 kcal / kg for bio-oil, 4864.06 kcal / kg for tar and then purified by vacuum distillation. GC-MS analysis of liquid smoke before and after purification was conducted to determine acetic acid and phenolic compounds in bio-oil with yield estimates before distillation 27.59%, 15:30% respectively and after purification was 44 775%, 7,821% respectively. While the results obtained in the phenol tar before distillation at 23 252%,and 42.82% after distillation. Keywords: Temperature, Pyrolysis, Coconut shell, the physical properties.