Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pengendalian Simulator Lift Empat Lantai berbasis PLC Omron CPM2A dan HMI
Deni Nurdiana (2017) | Tugas Akhir | Teknik Elektro
Bagikan
Ringkasan
Untuk menjalankan lift, maka diperlukan suatu sistem yang dapat mengontrol gerakan dari lift supaya berfungsi sesuai dengan yang diinginkan. Oleh karena itu, pada simulator lift ini menggunakan Programmable Logic Controller (PLC) sebagai alat pengendalinya. Pada proyek akhir ini bertujuan untuk merekondisi dari proyek akhir sebelumnya yang kondisi pengendalian level lantainya belum sempurna seperti yang kita inginkan karena kurangnya I/O pada PLC yang digunakan. Dengan digantinya PLC tipe CPM1A dengan CPM2A yang mempunyai lebih banyak I/O, pengendalian level lantai dapat menjadi lebih baik. Pada saat lift bergerak ke atas apabila ada permintaan turun pada lantai yang lebih kecil daripada lantai yang dituju maka permintaan diabaikan. Sebaliknya apabila permintaan turun berada pada lantai yang yang lebih besar daripada lantai yang dituju maka lift menuju lantai tersebut. Pintu kabin pada lift akan terbuka saat tiba di tujuan dan ketika ada intruksi panggilan menutup pintu pada kabin di lift tersebut. Penambahan sensor inframerah pada pintu lift dapat menghindari tertutupnya pintu lift saat orang-orang memasukinya, tampilan LCD memudahkan orang-orang yang berada di dalam lift mengetahui status lantai berada, dan penambahan human machine interface (HMI) dapat memvisualisasikan simulator lift tersebut. Kata Kunci: Simulator Lift, PLC, Inframerah, LCD, HMI.
Ringkasan Alternatif
To operate the lift, then needed a system that could control the movement of the elevator to suit the desired function. Therefore, in this elevator simulation using Programmable Logic Controller (PLC) as a tool operators. At the end of the project aims to improve the project before the end of the operating condition of the floor level not perfect as we want because of lack of I/O on the PLC being used. With change PLC CPM1A type to PLC CPM2A type that has more I/O operations can be executed on another floors level. operating floor level can be improved. At the time the elevator moves upward if there is demand down on the floor which is smaller than the destination floor, the request is ignored. Conversely, if demand falls are on the floor that is greater than the intended floor then the elevator to the floor. The elevator cabin door will open when they arrive at the destination and when there is a call instruction to close the door on the cabin in the elevator. The addition of the infrared sensors on the elevator door will prevent the elevator door closed when people enter, LCD display easy for people who are in the know the condition of the floor was the elevator, and the addition of the human machine interface (HMI) can visualize the elevator simulation. Keywords: Elevator Simulation, PLC, Infrared, LCD, HMI.