Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pengering Rumput Laut Berbasis IoT
Ripa Miptah Salam (2020) | Tugas Akhir | Teknik Elektro
Bagikan
Ringkasan
Rumput laut merupakan produk bernilai tinggi. Salah satu proses pengolahan rumput laut adalah pengeringan. Proses pengeringan rumput laut dilakukan secara konvensional menggunakan cahaya matahari membutuhkan waktu selama 2 hari dan sangat bergantung terhadap cuaca menyebabkan proses pengeringan tidak optimal dan menjadi masalah bagi petani. Alat ini betujuan untuk proses pengeringan rumput laut dengan suhu yang sesuai dengan Set Point dengan data suhu, kelembaban dan berat rumput laut yang dapat dipantau melalui aplikasi mobile. Alat ini menggunakan PTC keramik untuk pemanas dan kipas untuk menyebarkan panas pada ruang pemanas. Alat ini menggunakan sensor PT 100 untuk mendeteksi suhu, sensor HDC1080 untuk mendeksi kelembaban serta load cell untuk mendeteksi berat ruput laut pada ruang pengering . Kendali pada pengoperasian alat ini mengggunakan kendali PID. Hasil pengujian alat ini dengan Set point 50oC pada berat 176 gr didapat waktu pengeringan 3 jam dengan nilai Kp = 31.65 , Ti =18, dan Kd = 4.5. Dalam pengoperasian alat pemanas dan pemantauan suhu, kelembaban serta berat menggunakan aplikasi Mobile sehingga mempermudah pengguna. Kata Kunci: Rumput Laut, Aplikasi Mobile, Kendali PID.
Ringkasan Alternatif
Seaweed is a high value product. One of the processing of seaweed is drying. The process of drying seaweed done conventionally using sunlight requires 2 days and is very depend on the weather cause the drying process not to be optimal and will a problem for farmers. This project aims at the process of drying seaweed with a temperature that is in accordance with the Set Point with temperature, humidity and seaweed weight data that can be monitored through a mobile application. This project uses ceramic PTC as heaters and fan to spread heat to the heating chamber. This tool uses a PT 100 sensor to detect temperature, an HDC1080 sensor to detect humidity, and load cell to detect seaweed weight in the drying oven chamber. Control of the operation of this tool uses the PID control. The test results of this tool with Set point 50oC at 176 gr weight obtained by drying time 3 hour with a value of Kp = 31.65 , Ti =18, dan Kd = 4.5.. In the operation of heating devices and monitoring temperature and humidity using a Mobile application so as to facilitate users Keywords: Seaweed,mobile application, PID Control.