Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pengolahan Limbah Tekstil Menggunakan Metode Elektrokoagulasi Secara kontinyu Untuk Menurunkan Kadar COD dan Turbiditas
Fajar Budi Reksa Teguh (2017) | Tugas Akhir | -
Bagikan
Ringkasan
Industri tekstil merupakan salah satu industri penghasil limbah cair yang paling banyak dan memiliki masalah yaitu pencemaran lingkungan. Pemakaian bahan kimia sebagai bahan utama maupun bahan pembantu pada proses pengolahan limbah saat ini harus benar-benar dipertimbangkan terkait dengan beban pencemar lingkungan. Untuk menunjang pengolahan limbah di industri, dibutuhkan pengolahan limbah secara efektif dan ekonomis. Oleh karena itu penelitian ini bertujuan untuk mengolah limbah tekstil menggunakan metode elektrokoagulasi secara kontinyu. Alat yang mempunyai kapasitas pengolahan sebesar 22 L (per reaktor) dengan ukuran 26 cm x 26 cm x 45 cm. Elektroda yang digunakan adalah Stainless Steel (SS) dan Aluminium (Al) dengan ukuran elektroda tercelup 25 cm x 22 cm dengan jarak antar elektroda sebesar 5 cm. Pengolahan limbah tekstil menggunakan metode elektrokoagulasi dengan arus yang digunakan adalah 8, 12, 20 A. Hasil penelitian menunjukan kondisi terbaik dicapai pada arus 20 A dengan laju alir 1,6 L/mnt, mampu memberikan efisiensi penurunan Chemical Oxygen Demand (COD) sebesar 85% dengan penurunan Chemical Oxygen Demand (COD) sebesar 135,936 mgO2/L, dan efisiensi penurunan turbiditas sebesar 78,59 % dengan kadar penurunan turbuditas sebesar 17,13 Nephelotetric Turbidity Units (NTU), serta kenaikan pH sebesar 7,49. Kata kunci: Limbah Tekstil, Elektrokoagulasi, Penurunan COD, turbiditas, pH.
Ringkasan Alternatif
Textile industry is one of the most industry producing the most liquid compared to other industry waste and it is having the problem of environmental pollution. The use of chemicals as the main composition and supplementary materials on the waste treatment process is currently considered to be completely associated with the burden of environmental pollutants. To support the textile waste industry, sewage treatment needed to effectively and economically is needed. Therefore this study is. aimed to trial textile wastewater use electrocoagulation method with continuous Process. Equipment used for Treating the waste has capacity of 22 L (per reactor) with a size of 26 cm x 26 cm x 45 cm. The electrodes used are Stainless Steel (SS) and Aluminium (Al) electrodes immersed with size 25 cm x 22 cm with the distance between the electrodes of 5 cm. the textile treatment using electrocoagulation with current methods used were using 8, 12, 20 A respectively. The results showed the which best conditions achieved at current of 20 A with a flow rate of 1.6 L/min, is able to provide Chemical Oxygen Demand (COD) removal efficiency of 85% with a decreasing Chemical Oxygen Demand (COD) of 135.936 mgO2/L, and turbidity removal efficiency of 78.59% the turbidity level is reduced to 17.13 Nephelotetric Turbidity Units (NTU), however the pH increased to 7,49. Keywords: Textile Waste, Electrocoagulation, COD reduction, turbidity, pH.