Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Pengujian Kuat Lentur Beton Dengan Memanfaatkan Bubut Logam (Komunitas Bidang Ilmu : Rekayasa Struktur)
Eka Ahmad Kusnanda (2010) | Skripsi | Teknik Sipil , Teknik Sipil , Teknik Sipil , Teknik Sipil
Bagikan
Ringkasan
Teknologi beton saat ini sering dipergunakan dalam pekerjaan bangunan maupun tranportasi, namun harus tetap memperhatikan pelestarian lingkungan sehingga kegiatan konstruksi beton dapat berkelanjutan. Salah satu cara yang sering dilakukan oleh para peneliti adalah memanfaatkan bahan sisa untuk dimanfaatkan sebagai bahan pengganti bahan penyusun beton. Dalam penelitian ini bahan sisa tersebut adalah kriwel berupa bahan sisa pembubutan logam yang dicoba dijadikan sebagai bahan pengganti agregat kasar.
Metode mix desain menggunakan (SK SNI âÃâ¬Ãâ 15 âÃâ¬Ãâ 1990 âÃâ¬Ãâ 30 ) atau (SK SNI 03 âÃâ¬Ãâ 2834 âÃâ¬Ãâ 2000 ) untuk merencanakan campuran beton dan pengujian beton K-250. Pengelompokan benda uji dibagi menjadi dua golongan yaitu golongan I beton normal sebagai pembanding, dan golongan II beton dengan persentase sisa bubut logam terhadap agregat kasar ( 5%, 10% dan 15%).
Dari hasil penelitian kuat lentur beton pada umur 14 hari menghasilkan kuat lentur beton sebesar 101,85% âÃâ¬Ãâ 125,09% dari kekuatan tarik lentur pembanding yaitu beton normal sebesar 100%. Dengan adanya peningkatan kuat tarik lentur beton diperkirakan dapat mengurangi jumlah tulangan pada beton bertulang.
Ringkasan Alternatif
The concrete of technology nowadays is often use in construction projection or transportation, however it should keep maintain environmental reservation thus the activity of concrete construction can continuously. One ways that often does by researchers is using residue materials to use as the alternative material of composing concrete. In this research the rest material is kriwel in form of residue of metal lathe which try form as the alternative material of rough aggregate.
Mix design method used (SK SNI âÃâ¬Ãâ 15 âÃâ¬Ãâ 1990 âÃâ¬Ãâ 30 ) or (SK SNI 03 âÃâ¬Ãâ 2834 âÃâ¬Ãâ 2000 ) to plan the mix of concrete and assay concrete K-250. The grouping of test material divided into two groups namely group I normal concrete as comparison, and group II concrete with percentage the rest of metal lathe toward rough aggregate ( 5%, 10% and 15%).
From the research result strengths of flexibility concrete in aged 14 days resulting strength of concrete as many as 101,85% âÃâ¬Ãâ 125,09% from the strengths comparator of concrete namely normal concrete as many as 100%. By the presence of increasing the pool strength flexibility concrete can decrease the sum of concrete bones.