Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Alat Pendeteksi Posisi Muka Air Tanah Di Sumur Bor
Alan Musabiran NIM. (2017) | Skripsi | Teknik Komputer , Sistem Komputer , Teknik Komputer , Teknik Komputer
Bagikan
Ringkasan
Banyak masyarakat di perkotaan atau perdesaan membuat sumur bor air, agar dapat memperoleh sumber air bersih tetapi belum mengetahui berapa kedalaman muka air tanah di sumur bor yang mereka miliki. Saat ini cara yang umum digunakan untuk mengetahui muka air tanah adalah secara tradisional. Misalnya menggunakan sebuah pemberat (batu, besi dll) yang diikat pada tali, kemudian dimasukan ke dalam sumur jika pemberat menyentuh muka air tanah maka tali akan ditarik kembali dan diukur menggunakan meteran. Oleh karena itu, dirancang lah alat yang dapat mengukur posisi muka air tanah dari permukaan tanah di sumur bor serta dalam bentuk digital. Kegiatan yang akan dilakukan adalah pembuatan alat yang berfungsi untuk mengukur jarak antara muka air tanah ke permukaan tanah. Kemudian merancang software pada Arduino mega sebagai controller sekaligus sebagai alat yang mengubah sinyal pulsa menjadi jarak. Pada penelitian ini dapat disimpulkan dari perancangan alat ini cukup efektif untuk menentukan kedalaman muka air tanah dalam sumur bor dalam skala laboratorium. Dari hasil percobaan alat ini mendapatkan hasil akurasi hampir mencapai 87 %.
Ringkasan Alternatif
Many communities in urban or rural water artesian wells, in order to obtain a source of clean water but do not yet know how the depth of the ground water level in the wellbore that they have. Currently the common way used to determine the ground water level is traditionally. For example, using a ballast (stone, metal, dll) that is tied to a rope, and then inserted into the well if the ballast touches the ground water level, the rope will be pulled back and are measured using the meter. Therefore, the one tool designed to measure the position of the ground water level of the ground surface in the wellbore and in digital form. Activities that will be done is making the tool that serves to measure the distance between the ground water level to the ground. Then design software on the Arduino Mega as a controller as well as a tool that converts the pulse signal into the distance. In this study it can be concluded from the design tool is quite effective to determine the depth of the ground water level in the wellbore. From the experimental results of this tool to get the accuracy of nearly 87%.