Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Dan Implementasi Sistem Monitoring Dan Pengontrolan (Kompresor, Evaporator, Dan Kondensor) Pada Chiller Berbasis Mikrotroller Di PT. Gemilang Reksa Buana
Deka Gustian NIM. (2017) | Skripsi | Teknik Elektro , Teknik Elektro
Bagikan
Ringkasan
Sistem kontrol dan monitoring chiller adalah jenis pengontrol dan monitoring otomatis yang dirancang untuk dapat memonitor chiller ketika terdapat masalah dan dapat menjalankan chiller sesuai fungsi dari chiller tersebut. Untuk dapat menjalankan alat ini pengguna harus menghubungkan parameter-parameter input yang terdapat pada alat ini, kemudian semua input yang telah terhubung dapat dilihat pada monitor, ketika semua telah tampil maka langkah berikutnya pengguna harus memasukan nilai suhu yang ingin dicapai pada menu operation tekan tombol save dan kemudian menekan pilihan start maka harapan selanjutnya chiller akan bekerja untuk dapat mencapai nilai atau suhu yang diharapkan dan ketika chiller error atau memiliki kendala maka pengguna dapat melihatnya pada menu trouble history. Terdapatnya beberapa keluaran diharapkan semua jenis chiller dapat dikontrol oleh alat ini, diantaranya : kompresor, suhu, kondensor, tekanan refrigeran dan tekanan oli menggunakan mikrokontroller dengan jenis arduino mega, LCD nextion, modul RTC, modul SD card dan beberapa komponen pendukung lainnya. berdasarkan hasil pengujian diperoleh bahwa nilai dari perbandingan refrigeran dengan oli sebesar 60 : 35 pada kompresor, 7 ̡C- 28 ̡C untuk chiller, refrigeran 60 psig ̉ 260 psig disesuaikan dengan parameter sistem chiller yang dikembangkan.
Ringkasan Alternatif
System control and monitoring chiller is a kind of automatic control and monitoring are designed to monitor chiller when there is a problem and can run the chiller as a function of the chiller. To run this tool the user must connect the input parameters contained in the tool, then all of the inputs have been connected can be viewed on the monitor, when all has been performed then the next step the user must enter the temperature value to be achieved in the menu operation press the save button and then pressing the start selection of the next expectation chiller will work to achieve the expected value or temperature and when the chiller error or an obstacle then the user can see it on the menu trouble history. The presence of some of the expected output of all kinds of chiller can be controlled by these tools, such as: compressors, temperature, condenser, refrigerant pressure and oil pressure using a microcontroller with the type arduino mega, nextion LCD, RTC module, module SD cards and some other supporting components. based on test results obtained that the value of the ratio of refrigerant with oil at 60: 35 on the compressor, 7 ð C- 28 ð C for the chiller, the refrigerant 60 psig - 260 psig adapted to the chiller system parameters are developed.