Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Dan Realisasi Tempat Sampah Pintar Pemilah Jenis Sampah Logam Dan Nonlogam Terintegrasi Jaringan Internet
Amanda Rahmat Hidayat (2019) | Skripsi | Teknik Elektro
Bagikan
Ringkasan
Tempat sampah pintar merupakan salah satu cara alternatif yang bisa digunakan untuk pengelolaan sampah agar lebih efektif dalam menangani penumpukan sampah. Beberapa perancangan tempat sampah pintar dinilai belum memiliki efektifitas yang baik karena tidak dapat memilah jenis sampah sesuai dengan jenisnya dan membutuhkan listrik PLN sehingga harus dekat dengan sumber listrik. Perancangan ini diharapkan mampu memberikan efektifitas yang baik dalam memilah jenis sampah sehingga memudahkan dalam mendaur ulang sampah dan menggunakan solar cell sebagai sumber listrik. Pada perancangan ini tempat sampah dapat memilah jenis sampah sesuai dengan jenisnya khususnya pada sampah logam dan Non-logam menggunakan sensor proximity Induktif, sehingga sampah dapat mudah untuk dipisahkan. Tempat sampah ini juga dapat mendeteksi penumpukan sampah dan dapat memberitahukan kepada petugas kebersihan menggunakan WiFi yang terhubung jaringan internet untuk mengetahui lokasi tempat sampah berada dengan interface smartphone android. Sumber listrik yang dipakai untuk menghidupkan perangkat yaitu baterai yang terhubung dengan solar cell. Berdasarkan hasil pengujian deteksi jenis sampah diperoleh untuk jenis sampah logam dihasilkan tegangan output sensor sekitar 0.8 mVolt dan sampah non logam sekitar 3.1 Volt. Tegangan ini menyalakan sebuah indikator yang memudahkan perangkat dalam memilah sampah. Selain itu jika kapasitas sampah sudah pada 100 Liter disalah satu jenis tempat sampah maka akan diberitahukan kepada smartphone android berupa notifikasi. Pada aplikasi android dapat digunakan juga untuk memonitoring penumpukan sampah, lokasi dimana tempat sampah dan tempat sampah mana saja yang sudah terjadi penumpukan. Kata Kunci: Sampah, Tempat Sampah Pintar, Sensor Proximity Induktif, Android, Solar Cell.
Ringkasan Alternatif
Smart trash can is an alternative way that can be used for waste management to be more effective in dealing with garbage collection. Some smart trash bins are deemed not to have good effectiveness because they cannot sort the type of waste according to its type and require PLN electricity so it must be close to a power source. This design is expected to be able to provide good effectiveness in sorting out the types of waste making it easier to recycle waste and use solar cells as a source of electricity. In this design the trash can sort waste according to its type, especially in metal and non-metal waste using Inductive proximity sensors, so that waste can be easily separated. This trash can also detects the buildup of garbage and can notify the janitor to use WiFi connected to the internet network to find out the location of the trash can with the Android smartphone interface. The electricity source used to power the device is a battery connected to a solar cell. Based on the results of testing the type of waste detection obtained for the type of metal waste generated sensor output voltage around 0.8 mVolt and non-metal waste around 3.1 Volts. This voltage turns on an indicator that makes it easy for the device to sort waste. In addition, if the garbage capacity is at 100 Liters, one of the garbage bins will be notified to the android smartphone in the form of a notification. In the android application it can be used also to monitor the buildup of rubbish, the location where the trash can and which trash can have occurred. Keywords: Waste , Smart Trash, Inductive proximity sensor, Android, Solar Cells.