Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Kondensor Tipe Shell and Tube pada Sistem Pendingin Utama Siklus Terbuka PLTU 20 MW
Herliani Sya'diyah (2017) | Skripsi | -
Bagikan
Ringkasan
Kondensor PLTU umumnya merupakan perangkat penukar kalor tipe permukaan (surface) yang memiliki fungsi utama mengkondensasikan uap bekas keluar dari exhaust turbine. Fungsi tersebut sekilas kurang begitu penting tetapi ternyata keduanya merupakan faktor yang cukup vital dalam pengoperasian turbin maupun efisiensi siklus. Media yang dialirkan ke kondensor untuk mendinginkan atau mengkondensasikan uap adalah air yang disebut air pendingin utama (main cooling water). Air pendingin mengalir di dalam pipa-pipa kondensor sedang uap bekas mengalir dibagian luar pipa. Pada skripsi ini dilakukan perancangan kondensor shell and tube pada sistem pendingin utama siklus terbuka pembangkit listrik tenaga uap 20 MW. Perancangan ini disesuaikan dengan kebutuhan suhu air pendingin dalam sebuah pemodelan pembangkit listrik tenaga uap di dalam software cycle tempo 5.0 dengan kapasitas pengkondensasian uap sebesar 37497,69 kJ/s. Kondensor shell and tube hasil perancangan memiliki 1006 buah tube dengan panjang tube 9,96 m dan diameter luar shell sebesar 2,4 m. Berdasrkan hasil perhitungan penurunan tekanan pada sisi tube sebesar 0,05514 bar dan penurunan tekanan pada sisi shell sebesar 0,12 bar. Kata kunci: Kondensor shell and tube, Vakum kondensor, PLTU.
Ringkasan Alternatif
Power plant condenser is generally a type of heat exchanger device surface (surface) whose main function is the former steam condensing out of the exhaust turbine. That function is less important at first glance, but it turns out both are a vital factor in the operation of the turbine as well as the efficiency of the cycle. The media is streamed to the condenser to cool or condense water vapor is called the primary cooling water (main cooling water). Cooling water flowing inside the condenser pipes were former steam flowing on the outside of the pipe. In this final project design of shell and tube condenser in once through cooling system capacity of steam power plant 20 MW. The design customized by the needs of the cooling water temperature in a steam power plant modeling in the cycle tempo software 5.0 with steam condensing capacity of 37497,69 kJ /s. Shell and tube condenser design results have 1006 pieces of tube with a tube length of 9,96 m and a diameter of 2,4 m outer shell. Pursuant to the results of the calculation of the pressure drop on the tube side of 0,05514 bar and decrease the pressure on the shell side of 0,12 bar. Keywords: shell and tube condenser, Vacuum condenser, power plant.