Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Pengendalian Kecepatan Penggerak Pompa Industri Dengan Menggunakan Variable Speed Drive
Muhammad Birril Jasur (2022) | Tugas Akhir | -
Bagikan
Ringkasan
Motor listrik menjadi alat yang sangat penting di dunia perindustrian. Hampir semua mesin di industri menggunakan motor listrik sebagai penggeraknya. Biasanya pompa ini dijalankan dengan putaran maksimum dan umumnya penggunaan pompa ini dilakukan terus-menerus sehingga dapat menyebabkan pemborosan energi. Oleh karena itu, saat ini diperlukannya pemasangan variable speed drive untuk penghematan konsumsi listrik dengan mengatur putaran motor sesuai dengan kebutuhannya. Variable speed drive merupakan sebuah alat pengatur kecepatan motor dengan mengubah nilai frekuensi yang masuk ke motor. Rancangan pengendalian kecepatan penggerak pompa pada penelitian ini menggunakan variable speed drive yang didalamnya terdapat beberapa komponen utama, yaitu mikrokontroller berupa Arduino UNO, rangkaian optocoupler rangkaian inveter 3 fasa. Perancangan ini dibuat untuk mengganti pengendali tekanan pada pompa industri yang masih menggunakan sistem buka-tutup katup. Perancangan dilakukan dengan simulasi pada aplikasi proteus. Hasil dari pengujian ini adalah nilai frekuensi akan berubah seiring dengan berubahnya nilai tekanan yang terbaca pada sensor, semakin besar nilai tekanan yang terbaca maka akan semakin kecil nilai frekuensinya dan nilai putaran berbanding lurus dengan nilai frekuensi, sebaliknya jika nilai tekanan yang terbaca oleh sensor adalah kecil maka frekuensi dan putarannya akan semakin besar. Semakin besar nilai error yang diperoleh dari selisih antara set point dan tekanan yang terbaca sensor maka perubahan kecepatan pompa akan semakin besar.
Ringkasan Alternatif
The electric motor is a very important tool in the industrial world. Almost all machines in industry use an electric motor as their driving force. Usually this pump is run with maximum rotation and generally the use of this pump is carried out continuously so that it can cause waste of energy. Therefore, it is currently necessary to install a variable speed drive to save electricity consumption by adjusting the motor rotation according to its needs. Variable speed drive is a motor speed control device by changing the frequency value that enters the motor. The design of controlling the pump drive speed in this study uses a variable speed drive in which there are several main components, namely a microcontroller in the form of an Arduino UNO, a 3-phase inverter circuit optocoupler. This design is made to replace pressure controllers on industrial pumps that still use an open-close valve system. The design is carried out by simulating the proteus application. The result of this test is that the frequency value will change along with the change in the pressure value read on the sensor, the greater the pressure value read, the smaller the frequency value and the rotation value is directly proportional to the frequency value, conversely if the pressure value read by the sensor is small then the frequency and rotation will be greater. The greater the error value obtained from the difference between the set point and the pressure read by the sensor, the greater the change in pump speed.