Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Sistem Kontrol On-Off Dan Display Berbasis Node MCU Amica Pada Sistem Mini Refrigerator Via Internet
Herdyan Ahessa Ady Nugraha (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Sistem kontrol on/off dan display berbasis Node MCU Amica yang terdapat pada sistem mini refirgerator tenaga hibrid memudahkan pekerjaan kita dalam me-monitoring sistem agar kesegaran produk terjaga dan dapat bertahan lama. Dengan bantuan teknologi komunikasi, sistem mini refrigerator dapat di-monitoring dan dikontrol dari jarak jauh melalui smartphone. Dalam tugas akhir ini akan dirancang sistem kontrol on/off yang bertindak sebagai pengganti thermostat dimana T.setpoint-nya dapat diatur dan display yang dapat dimonitor dari jarak jauh.Node MCU Amica akan dihubungkan dengan sensor DS18B20 untuk mengukur temperatur pada kabin kemudian diunggah algoritma program untuk mengontrol on/off. Melalui aplikasi smartphone Blynk yang terhubung ke internet, pengaturan setpoint dapat dilakukan secara jarak jauh dan data yang telah didapat ditampilkan dan disimpan pada web Thingspeak. Hasil yang didapat tidak berbeda jauh dengan perancangannya, meskipun terdapat error yang relatif kecil pada setpoint 9℃ dan differential2 ℃, yaitu sebesar 0,307℃ pada Tcut-in dan 0,27℃ pada Tcut-out. Perancangan display berhasil ditampilkan di aplikasi smartphone Blynk dan hasilnya disimpan pada web Thingspeak.
Ringkasan Alternatif
The NODE MCU Amica based on / off and display control system provided on a hybrid mini power refirgerator system provides our work in monitoring the system so that product freshness is acceptable and long lasting. With the help of communication technology, the mini fridge system can be monitored and controlled from a long distance via a smartphone. In this final project, an On / Off control system will be designed that functions as a thermostat where T.setpoint can and display that can be monitored remotely. The MCU Amica code will use the DS18B20 sensor to measure temperature when it starts uploading using the program to controlling on / off. Through the Blynk smartphone application that is connected to the internet, set the setpoint can be done remotely and data that has been obtained and stored on the web is Thingspeak. The results obtained are not very different from the design, it is considered that there are relatively small errors at setpoint 9 ℃ and differential 2 ℃, which is equal to 0.307 ℃ in the cut-in and 0.27 ℃ in the cut-out. The design view was successfully approved in the Blynk application and the results approved on the web are Thingspeak.