Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perancangan Sistem Kontrol pada Mesin Refrigerasi Blast Chiller Berbasis Atmega16
Reza Gunawan (2014) | Tugas Akhir | -
Bagikan
Ringkasan
Sistem kontrol temperatur menjadi salah satu hal penting dalam dunia perindustrian, terutama di bidang refrigerasi dan tata udara. Sistem kontrol temperatur bertujuan untuk memantau kinerja suatu sistem atau plan. Pada refrigerasi dan tata udara suhu adalah aspek penting, dikarenakan tujuan dari refrigerasi adalah mengkondisikan suatu produk atau ruangan sesuai dengan rancangan. Oleh karena itu pada tugas akhir ini penulis membuat suatu alat kontrol temperatur pada sistem refrigerasi blast chiller berbasis mikrokontroler Atmega 16. Pada sistem kontrol temperatur ini penulis menggunakan tiga buah sensor temperatur LM35 dengan rata-rata ketiga sensor dijadikan referensi untuk mengontrol sistem refrigerasi (ON/OFF Kompresor). Selain itu hasil pengukuran rata-rata tiga sensor LM35 dan status pada sistem ditampilkan oleh sebuah LCD. Selain itu pengkontrolan kompresor menggunakan relay berfungsi dengan baik dengan temperatur (energized relay) 5˚C . Kata kunci : Mikrokontroler Atmega16, LM35, Relay
Ringkasan Alternatif
System control temperature is one of the important things in the world of industry, especially in the refrigeration and air conditioning. Control system temperature aims to monitor the performance of a system or plan. In the refrigeration and air conditioning temperature is an important aspect, because the purpose of refrigeration is conditioning a product or a room in accordance with the design.. Therefore, at the end of this task the authors make a device monitoring and temperature control on the blast chiller refrigeration system based microcontroller Atmega 16. In the system temperature control, the writer uses three LM35 temperature sensor with a sensor used as reference for the control refrigeration's system (ON / OFF Compressor). Additionally the measurement results of three sensor LM35 and status on the system is displayed by an LCD. In addition compressor control using a relay to function properly with temperature cut out (energized relay) 5˚C. Key word : Microcontroler Atmega16, LM35, Relay