Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Perhitungan Panjang Pipa Evaporator Subcooler pada Sistem Dedicated Subcooling
Irfan Dwiki Naufal (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Banyak cara dalam meningkatkan performansi sistem refrigerasi. Salah satu cara untuk meningkatkan performansi adalah melakukan modifikasi siklus seperti subcooling. Modifikasi siklus dengan menggunakan satu sistem tambahan subcooler yang digunakan untuk mendinginkan refrigeran keluar kondenser utama disebut metode dedicated subcooling. Penggunaan evaporator subcooler sebagai media pendingin pipa keluar kondenser utama dapat dilakukan dengan metode ini, sehingga diperlukan perhitungan evaporator subcooler dengan tujuan meningkatkan performansi sistem utama. Perhitungan panjang pipa disesuaikan dengan kapasitas kompresor subcooler sebesar 1/2 PK dengan refrigeran R-600a, maka diperlukan perhitungan perpindahan panas pada pipa evaporator subcooler untuk mendapatkan temperatur evaporasi yang dirancang. Dari hasil perhitungan diperoleh panjang pipa evaporator subcooler adalah 18,46 m dengan diameter pipa tembaga 1/4 inch. Rata-rata nilai temperatur evaporasi yang dihasilkan sistem sebesar 6,21℃ dan temperatur evaporasi terendah sebesar 5,35℃. Hal ini berakibat pada terjadinya subcooling pada sistem utama dengan nilai rata-rata derajat subcool sebesar 3,86℃.
Ringkasan Alternatif
There are many ways to improve the performance of refrigeration systems. One way to improve performance is to perform cycle modifications such as subcooling. A cycle modification using a single additional Subcooler system is used to cool the refrigerant out of the main condenser called a dedicated subcooling method. The use of the evaporator Subcooler as the media coolant out the main condenser pipe can be done by this method, so the required calculation of the evaporator Subcooler with the aim of improving the performance of the main system. Calculation of the length of the pipe is adjusted to the capacity of the Subcooler compressor 1/2 PK with an R-600a refrigerant, it is required calculation of heat transfer in the Subcooler evaporator pipe to get the evaporated temperature designed. From the calculation result obtained the length of the evaporator pipe Subcooler is 18.46 m with a diameter of copper pipe 1/4 inch. The average evaporated temperature value of 6.21 ð C and the lowest evaporation temperature is 5.35 ðc. This results in the occurrence of subcooling of the main system with a Subcool degree average value of 3.86 ðC.