Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Rancang Bangun Model Sistem Pengkondisian Udara Dengan Sistem Kontrol Berbasis Mikrokontroler
Tedi Haryadi (2018) | Tugas Akhir | -
Bagikan
Ringkasan
Teknologi di bidang refrigerasi mempunyai peranan yang sangat penting saat ini. Hal ini terlihat dari semakin banyaknya penggunaan sistem ini baik di industri maupun rumah tangga. Sehingga perlu dibuat model sistem pengkondisian udara berbasis mikrokontroler dengan parameter yang dikendalikan berupa temperatur agar tercapai sistem yang optimal. Pada tugas akhir ini akan dilakukan pembuatan model sistem pengkondisi udara pada ruangan yang tertutup. Cara kerja dari model sistem pengkondisi udara ini sama dengan cara kerja Air Conditioning ruangan. Tahapan awal yang dilakukan adalah merancang dan membuat ruangan yang terisolasi. Selain itu, akan dilakukan pula perancangan dan pemilihan komponen sistem pendingin, meliputi kompresor, evaporator, kondensor, dan katup ekspansi. Tahap berikutnya dilakukan instalasi sistem pendingin dengan menempatkan evaporator di dalam ruangan. Setelah instalasi selesai dilanjutkan dengan tahap pengujian untuk mengetahui kinerja sistem pendinginannya dengan cara memonitor temperatur ruangan. Pada penelitian ini digunakan lampu pijar sebagai pengganti komponen yang menghasilkan panas. Melalui tugas akhir ini telah dihasilkan model sistem pengkondisian udara yang mampu mendinginkan ruangan dengan beban pendinginan 100 Watt dengan COP sebesar 2,9 dan sistem kontrol berbasis mikrokontroler mampu mengatur putaran fan secara proporsional menyesuaikan temperatur kabin Kata kunci: Mekatronika, PCS (Process Kontrol System), alat peraga, mesin pendingin, dan Air Conditioning.
Ringkasan Alternatif
Technology in the field of refrigeration has a very important role at this time. This is evident from the increased use of these systems both in industry and households. So that needs to be made model of a microcontroller-based air conditioning system with a temperature-controlled parameters in order to achieve optimal system. In this final project will be carried out modeling of air conditioning system in a closed room. The workings of the air conditioner system model is similar to how the Air Conditioning room. The initial stages of designing and making the room is isolated. In addition, there will be also the design and the selection of cooling system components, including the compressor, evaporator, condenser, and expansion valve. The next stage of the installation is done by placing the evaporator cooling system in the room. After the installation is completed followed by a testing phase to determine the performance of the cooling system by means of monitoring the temperature of the room. In this study used as a replacement for incandescent lamps components that generate heat. Through this thesis generated models of air conditioning system that is able to cool the room with a maximum load of 99.7 watts. The control system is able to display the number of temperature measurements in the five sections of the model as well as the air conditioning system is able to adjust the fan rotation in accordance with the cabin temperature to remain at the set point. Keywords: Mechatronics, PCS (Process Control System), props, engine coolant, and Air Conditioning.