Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Rancang Bangun Ulang Mini Cooler Menggunakan 2 Jenis Kondenser Berdasarkan Media Pendingin
Fahrurrozi Nur Buana Putra (2020) | Tugas Akhir | -
Bagikan
Ringkasan
Mini coolerr yang sering digunakan dalam sistem refrigersi kompresi uap pada umunya digunakan untuk penyimpanan buah buahan maupun sayuran. Sistem kompresi uap itu sendiri memiliki empat komponen utama yang digunakan dalam sistem ini, yaitu kompresor, kondenser, alat ekspansi, dan evaporator. Kondenser berfungsi untuk membuang kalor dari sistem ke lingkungan. Kondenser ini memiliki 2 jenis berdasarkan media pendinginnya yaitu evaporative cooled condenser dan air cooled condenser. Dengan menggunakan produk wortel seberat 3,2 kg, dan dijaga suhunya di 6⁰C. Untuk penggunanaan 2 jenis kondenser berdasarkan media pendinginnya menghasilkan perbedaan temperatur pada jalur masuk dan keluaran kondenser. Pada air cooled condenser menghasikan perbedaan temperatur tertinggi sebesar 9,3⁰C, dan untuk media pendingin evaporative condenser menghasilkan perbedaan temperatur tertinggi sebesar 14,6⁰C. Selain perbedaan temperatur hasil percobaan mini cooler juga menghasilkan COP aktual untuk air cooled condenser sebesar 3,32 dan efisiensinya sebesar 73% sedangkan untuk COP aktual dengan menggunakan media pendingin evaporative condenser menghasilkan COP aktual sebesar 3,75 dan efisiensinya sebesar 76%. Kata kunci: Sistem kompresi uap, 2 jenis kondenser, mini cooler.
Ringkasan Alternatif
Mini Coolerr that is often used in steam compression refrigerant system in its primarily used for the storage of fruits and vegetables. The steam compression system itself has four main components used in this system: compressors, condensers, expansion tools, and evaporators. Condenser serves to remove the heat from the system to the environment. The condenser has two types based on its cooling medium, which is evaporative cooled condenser and air cooled condenser. By using carrot products weighing 3.2 kg, and kept temperature at 6⁰C. For the use of 2 types of condensers based on the cooling medium produces a temperature difference in the entrance and condenser output. In water cooled condenser produces the highest temperature difference of 9,3⁰C, and for the media coolant evaporative condenser produce the highest temperature difference of 14,6⁰C. In addition to the temperature difference of the test result mini cooler also produce the actual COP for air cooled condenser of 3.32 and its efficiency of 73% while for the actual COP using the media coolant evaporative condenser produces COP of 3.75 and its efficiency by 76%. Keywords: Steam compression system, 2 types of condenser, mini cooler.