Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Rancangan Bangun Pemantauan Bawah Permukaan Tanah Menggunakan Metoda Geolistrik Berbasis Mikrokontroller
Aldi Akhbar NIM. (2016) | Skripsi | Teknik Komputer , Sistem Komputer , Teknik Komputer
Bagikan
Ringkasan
Geolistrik merupakan salah satu metode Geofisika yang mempelajari sifat kelistrikan material bumi dan bagaimana cara mendeteksinya dari permukaan bumi. Dalam penelitian ini, metoda Geolistrik yang digunakan adalah metoda Resistivity. Dimana dalam metoda ini, arus listrik di injeksikan ke bawah permukaan bumi kemudian arus dan potensialnya diukur di permukaan bumi. Data yang diperoleh kemudian diolah untuk memperoleh nilas Resistivity material bumi. Metode Resistivity terbagi menjadi dua yaitu metode sounding dan mapping, dalam penelitian ini digunakan metode Resistivity sounding untuk melakukan pengukuran satu dimensi (1D). Konfigurasi elektroda yang digunakan adalah konfigurasi Wenner dimana jarak pemasangan elektroda pada permukaan tanah memiliki jarak yang sama. Alat ukur Resistivity yang digunakan adalah sebuah mikrokontroller dengan pengujian skala laboratorium menggunakan wadah berbahan kaca 100 cm x 10 cm x 40 cm (panjang x lebar x tinggi) yang berisi lempung, pasir dan air. Dari hasil pengukuran diperoleh bahwa data dari pengukuran menggunakan mikrokontroller cukup baik namun masih ada error dalam menentukan nilai tahanan jenisnya (Resistivity). Kemudian data pengukuran yang diperoleh , diolah lebih lanjut dengan memanfaatkan software IPI2Win dapat diketahui bahwa terdapat tiga lapisan yaitu lapisan pertama adalah lempung dengan ketebalan 4 cm, lapisan kedua adalah pasir dengan ketebalan 12 cm dan lapisan ketiga adalah air dengan ketebalan 8 cm.
Ringkasan Alternatif
Geoelectric is a Geophysical method that studies the electrical properties of earth materials and how to detect it from the earth's surface. In this research, the geoelectrical method choosed is resistivity method. In which, the electrical current is injected through the subsurface. Then, the electrical current which flow through the subsurface and its potential is measured from the surface. The resulting data is then processed to get the resistivity value of the earth materials. Resistivity method is divided into two sounding and mapping methods, but in this case study used method for measuring Resistivity sounding one-dimensional (1D). The electrode configuration used is the Wenner configuration, where the distance mounting electrodes on the surface of the soil has the same distance. The resistivity measurement unit used is a microcontroller with a laboratory-scale testing using a container made from a glass of 100 cm x 10 cm x 40 cm (length x width x height) contain of clay, sand and water. From the measurement using the found that resulting data using a microcontroller is good enough, but still an error in determining the value of Resistivity. Then, the still measurement data come up is processed using IPI2Win. Software it can be seen that there are three layers, namely the first layer is clay with thickness 4 cm, the second layer is sand with a thickness of 12 cm and the third layer is water with a thickness of 8 cm.