Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
RECOVERY ION Cu2+ DARI SISA PROSES DETOKSIFIKASI SO2/UDARA MENGGUNAKAN METODE CARBON IN PULP DI PT ANTAM TBK UBPE PONGKOR
Ilham Herawan (2013) | Tugas Akhir | -
Bagikan
Ringkasan
Salah satu proses penting dalam sistem pengolahan limbah di PT Aneka Tambang Tbk. Unit Bisnis Pertambangan Emas Pongkor adalah proses detoksifikasi. Proses detoksifikasi adalah proses destruksi sianida menggunakan SMBS (Sodium Meta-bisulfit) dan CuSO4.5H2O. Metode ini digunakan untuk mengubah sianida (CN-) menjadi sianat (CNO-) menggunakan oksigen (O2) dari injeksi udara ke dalam slurry dengan SO2 dari Sodium Meta-bisulfit (Na2S2O5) sebagai pengoksidasi dan ion Cu2+ dari pelarutan CuSO4.5H2O sebagai katalis. Selain berfungsi sebagai katalis, ion Cu2+ juga dapat berfungsi sebagai pengkompleks Fe sianida sehingga mengendap bersama-sama Fe. Kelebihan ion Cu2+ yang tidak bereaksi selanjutnya dapat secara perlahan mengendap sebagai hidroksidanya. Oleh karena itu, pada penelitian ini dilakukan proses recovery kelebihan ion Cu2+ sebelum mengendap sebagai hidroksida. Pada overflow proses detoksifikasi didapatkan slurry yang mengandung tembaga kompleks. Hal ini menyebabkan slurry yang mengandung tembaga kompleks berpotensi untuk dilakukan proses recovery dan digunakan kembali pada proses detoksifikasi. Penelitian ini bertujuan untuk menentukan konsentrasi karbon aktif sebagai adsorben dan laju alir umpan yang tepat sehingga menghasilkan persen recovery tertinggi dengan menggunakan metode Carbon In Pulp. Variasi konsentrasi adsorben dalam penelitian adalah 10, 15, 20 dan 25 g/L; sedangkan variasi laju alir umpan adalah 22, 40, 62 dan 80 mL/s. Hasil penelitian pada percobaan simulasi CIP di laboratorium PT Antam Tbk. UBPE Pongkor, menunjukkan bahwa konsentrasi adsorben yang tepat yang didapat adalah 20 g/L dan laju alir umpan yang tepat didapat pada kondisi 22 mL/s sehingga dihasilkan persen recovery tertinggi yakni sebesar 85,25%. Kata kunci : detoksifikasi, ion Cu2+, Carbon In Pulp, recovery
Ringkasan Alternatif
One of the most important process in waste water treatment systems at PT Antam Tbk. Pongkor Gold Mining Business Unit is the detoxification process. The process is the destruction cyanide using SMBS (Sodium Meta-bisulfite) and CuSO4.5H2O. This is used to convert the cyanide (CN-) into cyanates (CNO-) using oxygen (O2) from the injection of air into the slurry with SO2 of Sodium Meta-bisulfite (Na2S2O5) as an oxidizer and Cu2+ ion from dissolving CuSO4.5H2O as a catalyst. Another function of Cu2+ is precipitating Fe as a complexed Fe cyanide. Unreacted Cu2+ ion will slowly settles as hydroxide. Therefore, this research recovers those Cu2+ ion excess before being precipitated into hydroxide. The slurry containing copper complex is obtained from the overflow process of detoxification. This copper contained in the has the potential to be recovered and reused in the process of detoxification. The purpose of this research are determine the right concentration of activated carbon as adsorbent and feed flow rate to produce the highest percent recovery using Carbon In Pulp method. The variation of adsorbentÃâs concentration in this research is 10, 15, 20 and 25 g/L and the variation of the feed flow rates is 22, 40, 62 and 80 mL/s. The results on the CIP simulation experiments in the laboratory of PT Antam Tbk. UBPE Pongkor, showed that the right concentration of adsorbent obtained 20 g/L and the feed flow rate obtained 22 mL/s to produce the highest percent recovery of 85,25%. Keywords: detoxification, Cu2+ ion, Carbon In Pulp, recovery