Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Rekondisi Alat Peraga Mesin Pendingin Kompresi Uap R-22 Dan Modifikasi Sistem Kelistrikan
Rahadian Maulana Yogaswara (2018) | Tugas Akhir | -
Bagikan
Ringkasan
Alat peraga pada mata kuliah Perawatan Mesin Pendingin dan Penukar Kalor khususnya bidang Mesin Pendingin di Laboratorium Fluida Termal dan Otomotif ada beberapa kerusakan dalam sistemnya sehingga tidak dapat digunakan untuk praktikum dan harus dilakukan rekondisi. Rekondisi merupakan upaya yang bertujuan mengembalikan fungsi dan kinerja alat tersebut agar dapat beroperasi dan untuk keperluan pada saat praktikum. Pada tugas akhir ini akan dilakukan rekondisi pada komponen-komponen mesin pendingin meliputi perbaikan pada sistem kelistrikannya, penurun tekanan, kondenser, dan alat ukur suhu. Dalam pelaksanaannya tahap yang dilakukan meliputi proses pemeriksaan awal, identifikasi masalah, proses pembongkaran dan pembersihan, proses inspeksi guna mengetahui letak atau penyebab kerusakan, lalu dilakukan perbaikan dan pergantian komponen akan dilakukan apabila diperlukan. Tahap selanjutnnya melakukan instalasi, serta dilanjutkan dengan tahap pengujian untuk mengetahui kinerja sistem pendinginannya dengan cara memonitor temperatur fluida yang didinginkan. Nilai COP hasil pengujian sesuai rentang dalam buku manual alat peraga mesin pendingin yaitu diatas 3,5. Nilai COP saat menggunakan pipa kapiler yaitu 4,8 dan 4,6. Nilai COP saat menggunakan katup TXV yaitu 3,9 dan 3,8. Kata kunci: sistem refrigerasi, temperatur masuk evaporator, COP (Coefficient of Performance).
Ringkasan Alternatif
Techware in the subjects of refrigeration and heat exchanger maintenance in particular refrigeration field at fluid, thermal and Otomotive there some refrigeration in the system so it can not be used for lab work. Recondition is an effort that aims to restore the function and performance of the tool in order to operate and for the purpose at the time of the lab. In this final project will be reconditoned on refrigeration components include improvements on the electrical system, pressure reducer, condenser, and temperature gauge. In the implementation of the stage include the process of initial inspection, problem identification, disassembling and cleaning, inspection process to determine the causes of damage, then made repairs and replacement components will be done if necessary. The next step si to install, and proceed with the testing phase to determine the performance of refrigeration system by monitoring the temperature of the cooled fluid. COP value of test result according to range in manual book of refrigeration teachware is above 3.5. The COP value when using capillary pipe is 4.8 and 4.6. The COP value when using TXV valve is 3.9 and 3.8. Keywords: refrigeration system, evaporator entrance temperature, COP (Coefficient of Performance).