Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Studi Eksperimental Pelat Lantai Hibrid Beton-Styrofoam-Steel Deck Terhadap Lentur
Abqori Gilang Gumilar (2017) | Tugas Akhir | Teknik Sipil
Bagikan
Ringkasan
Tujuan dari studi ini untuk mengetahui perilaku pelat lantai pracetak hibrid beton-styrofoam-steel deck (BSS) terhadap beban lentur. Pelat BSS terdiri atas tiga lapis, yaitu beton di lapisan atas; styrofoam di lapisan inti; dan steel deck (pelat baja) pada lapisan bawah dari pelat BSS. Pelat BSS dengan dimensi 1200mm x 300mm diuji terhadap lentur dengan variabel densitas styrofoam, ketebalan lapisan styrofoam, dan ketebalan lapisan beton. Pengujian pelat lantai ini dilakukan berdasarkan ASTM C78 94, statik monotonik, deflection control. Hasil studi menunjukkan bahwa pelat BSS dengan styrofoam densitas 12-20 kg/m3 mengalami mekanisme keruntuhan yang cukup baik, namun untuk pelat BSS dengan styrofoam densitas 30 kg/m3 mengalami keruntuhan dini (premature failure). Ketebalan lapisan styrofoam tidak banyak mempengaruhi peningkatan beban maksimum yang terjadi, namun pada pelat BSS dengan styrofoam densitas 30 kg/m3 mengalami penurunan beban maksimum sebesar 28,2%. Sedangkan ketebalan lapisan beton yang berbeda mempengaruhi kenaikan beban maksimum sebesar 33,51%; 46,13%; dan 37,35% untuk densitas styrofoam 12 kg/m3; 20 kg/m3; dan 30 kg/m3, secara berurutan. Pelat BSS ini mereduksi berat total sebesar 53,05% per m2 dibandingkan dengan pelat lantai beton bertulang biasa. Kata kunci: pelat hibrid beton-styrofoam-steel deck, densitas styrofoam, beban lentur.
Ringkasan Alternatif
The objective of this study was to know the behaviour of hybrid precast slab concrete-styrofoam-steel deck (CSS) subjected to flexural strength. The CSS slab consist of three layers, they are concrete on the upper layer; Styrofoam on the core layer; last the steel deck on the bottom layer of the CSS slab. The dimension of the CSS slab is 1200mm x 300mm tested to flexural strength with variables the Styrofoam's density, the thickness of the Styrofoam layer, last the thickness of the concrete layer. The slab examination according to ASTM C78 94, static monotonic, deflection control. The study shows that the CSS slab using Styrofoam with the density value 12-20 kg/m3 shows a good failure mechanism, but the CSS slabs using Styrofoam with the density value 30 kg/m3 was having a premature failure. The Styrofoam layer thickness doesn't make any differences about the maximum load enhancement, but on the CSS slab using Styrofoam with the density value 30 kg/m3 was having a load maximum reduction approximately 28,2%. Whereas the differences of concrete layer make a quite big gap about the maximum load enhancement approximately 33,51%; 46,13%; 37,35% for the Styrofoam's density 12 kg/m3; 20 kg/m3; 30 kg/m3. The CSS slab reduce the total slab self-weight approximately 53,05% per m2 compared with the reinforced concrete slab. Keyword: concrete-styrofoam-steel deck hybrid slab, Styrofoam's density, flexural strength.