Perpustakaan judul masih dalam tahap pengembangan, admin siap menampung kritik dan saran
Usulan Autonomous Maintenance Mesin CNC Type TMV-760 Pada Produk Pipe Intake 17113-EON40 Hino (studi kasus Di PT. Wika Intrade Majalengka)
Mumuh Muhamad Muklis (2011) | Skripsi | Teknik Industri
Bagikan
Ringkasan
Perawatan adalah kegiatan pendukung utama yang bertujuan untuk menjaminbr /
kelangsungan peranan fungsional suatu sistem produksi (peralatan, mesin) sehinggabr /
pada saat dibutuhkan dapat dipakai sesuai kondisi yang diharapkan. Hal ini dapatbr /
dicapai dengan melakukan kegiatan pemeliharaan dan perawatan terhadap mesinbr /
tersebut.br /
Pada penelitian ini metode yang digunakan adalah Autonomous Maintenance, yangbr /
merupakan salah satu pilar dari Total Productive Maintenance (TPM). Autonomousbr /
Maintenance adalah kegiatan yang dirancang untuk melibatkan operator dalambr /
merawat mesin. Tujuan autonomous maintenance merubah paradigma lama bahwabr /
operator produksi hanyalah mahir mengoprasikan mesin saja sehingga tidak perlubr /
paham dan tidak perlu peduli dengan kerusakan mesin dan kualitas produk yangbr /
dihasilkan oleh mesin.br /
Penelitian dilakukan di PT. WIKA INTRADE yang bergerak dibidang industribr /
manufaktur, penelitian ini berfokus pada mesin CNC type TMV-760 yangbr /
melakukan proses machining terhadap produk Pipe Intake 17113-EON40 HINO.br /
Permasalahan yang muncul pada mesin ini adalah sering terjadinya pemberhentianbr /
pada saat beroprasi yang disebabkan kerusakan mesin dan komponenkomponennya,br /
karena pemeliharaan yang dilakukan oleh operator sangat sederhana,br /
disebabkan kurangnya keterampilan dari operator. Tahapan pertama melakukanbr /
pengukuran efektivitas mesin CNC type TMV-760 menggunakan metode OEE,br /
kemudian melakukan perbaikan dengan mengusulkan metode autonomousbr /
maintenance.br /
Data yang digunakan data satu tahun terakhir yaitu Bulan Januari-Desember 2010.br /
Selama periode tersebut diperoleh nilai Overall Equipment Effectiveness (OEE)br /
yang berkisar antara 78,90%-89,23%, ternyata tidak semua bulan sudah mempunyaibr /
nilai OEE ideal yaitu 85%. Hal ini disebabkan lamanya downtime dan rejectbr /
produk masih banyak, dikarenakan operator masih memakai paradigma lama. Olehbr /
karena itu diusulkan penerapan metode autonomous maintenance pada operatorbr /
mesin CNC type TMV-760 bertujuan untuk merubah paradigma lama.
Ringkasan Alternatif
Treatment is a major supporter of activities which aims to ensure the continuity of thebr /
functional role a system production (tools, machines) so when needed can be usedbr /
according to the conditions expected. This can be achieved by performingbr /
maintenance activities and maintenance of the machine.br /
In this research is used Autonomous maintenance method, which is one of the pillarsbr /
of Total Productive Maintenance (TPM). Autonomous Maintenance is activitiesbr /
designed to involve operators in the care of the machine. Autonomous maintenancebr /
purposes to change the old paradigm that the production operator is just not proficientbr /
to operate the machine so it does not need to understand and need not be concernedbr /
with damage to the engine and the quality of products produced by the machine.br /
The research done at PT WIKA INTRADE engaged in the manufacturing industry,br /
this research focuses on CNC machine type TMV-760 that does the machining of thebr /
17 113-Intake Pipe products EON40 HINO. The problems that arise on this machinebr /
is a frequent occurrence at the time of dismissal operate due to its components,br /
because the maintenance is performed by the operator is very simple, due to lack ofbr /
skill of the operator. The first stage of measuring the effectiveness of CNC machinebr /
type TMV-760 using the method of OEE, and then the improvement with thebr /
proposed method of autonomous maintenancebr /
The data used from the last one year is January to December 2010. During the periodbr /
values obtained Overall Equipment Effectiveness (OEE), which ranged betweenbr /
78.90% -89.223%, not all months have been an ideal OEE value is 85%. This is duebr /
to the length of downtime and reject the product is still a lot, due to operators stillbr /
have the old paradigm. Therefore, the application of the method proposedbr /
autonomous maintenance method on operator CNC machine type TMV-760 aims tobr /
change the old paradigm.